Valhalla 2100 Series Power Analyzer Features Include:

These two benchtop single-phase Digital Power Analyzers are fully loaded with measurement features you'd expect on instruments costing three times the price. Both units boast twin high resolution 4 1/2 digital displays, DC to 50 KHz frequency response, true power measurement, true RMS voltage and current and built-in peak overload indicators. The only difference between the two units are their respective voltage ranges. The 2100 offers 600, 300 and 150 volt ranges while the 2101 (pictured above) features 300, 150 and 30 volt ranges.

The Valhalla 2100 series power meters are also great measurement instruments for college and university motor test laboratories.

• Accuracy: (Voltage and Current True RMS) DC & 20 Hz to 5 KHz: ± 0.1% of reading ± 6 counts
• 5 KHz to 15 KHz: ± 0.5 % of reading ± 6 counts
• 15KHz to 20 KHz: ± 0.75% of rdg ± 6 counts - useable to 50 KHz with typically 1 % error per 10 KHz
• Maximum Input: 600 VDC or RMS AC, 1500 V peak
• Displays: Dual 4± Digit (20,000 counts) 7 segment LEDs
• Watts Accuracy: 25 °C ± 5°C, 1 year
• DC & 20 Hz to 5 KHz: ± 0.25 % of reading ± 6 counts
• 5 KHz to 10 KHz: ± 0.5% of reading ± 0.5 % of range
• 10 KHz to 20 KHz: ± 1% of reading ± 1% of range
• 20 KHz to 50 KHz: additional 1% per 10 KHz above 20 KHz
• Power Factor Response: Unity (1.000) to zero (0.000)
• Power Factor Accuracy: for inputs > than 10 % of full scale
• DC to 1 KHz: ± 5 counts
• 1 KHz to 5 KHz: ± 10 counts
• 5 KHz to 10 KHz: ± 15 counts
• Extended current capacity is available using 150 amp and 1000 amp clamp-on current transformers (option"I-150 and option"I-1000"), low current 20 mA versions and low power factor versions (low watts amplified x 10) are also available.
• Displays: Large 4 1/2 Digit (20,000 counts) 7 segment L.E.D. type

Accessories

The following accessories are compatible with 2100 Series Digital Power Analyzers:

• Current transformers with a 1000:1 step down ratio (1% accuracy) include option "I-1000" (1000 amps capacity) and option "I-150" (150 amp capacity)
• Rack Mount Adapters -For 19" Racks
• Load Extension Cord option "X-21" for easy 120 VAC load connections
• Clamp-on Current Transformer Option "I-150": Extends AC current Measurement capability on the 2100 and 2101 to 150 amps RMS. The 1000:1 output ratio is 2% accurate from 50Hz to 400Hz. The unit accomodates up to ?" diameter conductors.
• Clamp-on Current Transformer Option "I-1000": Extends AC current measurement capability to 1000 amps RMS. The 1000:1 ratio CT is 2% accurate from 50Hz to 400Hz. Data Output Port Option "X21": Approximately three feet in length for each half, this convenient adaptor cord plugs directly into a standard 115V AC power outlet and mates with the 2100 or 2101 via heavy duty banana jacks. Female half provides for quick and easy load connect or disconnect capability.
• For low current applications Option "20mA" provides a lower current range of 20mA, includes 200mA and 2.0A ranges; however, it deletes the higher 20 ampere range.